updating problem

This is where you get help from other fellow node operators.
Post Reply
spherionic
Newbie
Posts: 5
Joined: 20 Sep 2022, 21:09

updating problem

Post by spherionic »

raspberry pi on home network. runninig mynode on laptop. trying to update community edition. open mynode, click linux terminal. I follow instructions. Everything ok until last required step - sudo mynode-local-upgrade [pc ip address]. I go to whatsmyipaddress to make sure i have the right ipaddress and put that in the sudo statement. It says "invalid ipv6 numeric address. But whatsmyipaddress says I do not have an ipv6 address. Help?
User avatar
Wiredancer
Jr. Member
Posts: 95
Joined: 28 Aug 2021, 05:01
Location: New Zealand
URL: https://lntxbot.com/@wiredancer
Contact:

Re: updating problem

Post by Wiredancer »

Hello. Just type ip addr in your terminal and find ipv4 address give in the output. Use that address in the upgrade command and you should be fine.
Did you find my post helpful?
Why not send me few sats?
:arrow: Get LN QR code.
Happy routing!
spherionic
Newbie
Posts: 5
Joined: 20 Sep 2022, 21:09

Re: updating problem

Post by spherionic »

i get long list. any ideas what to pick out from it as address? thnx

admin@myNode:~ $ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether dc:a6:32:fd:5e:05 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.2/24 brd 192.168.1.255 scope global dynamic noprefixroute eth0
valid_lft 55400sec preferred_lft 55400sec
inet6 fe80::3ac6:80c:6cd7:c539/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether dc:a6:32:fd:5e:06 brd ff:ff:ff:ff:ff:ff
4: br-3ae2f1a8fd4c: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether 02:42:24:d0:9e:bb brd ff:ff:ff:ff:ff:ff
inet 172.30.0.1/16 brd 172.30.255.255 scope global br-3ae2f1a8fd4c
valid_lft forever preferred_lft forever
5: br-4b0c0b1426fb: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether 02:42:81:fa:95:d0 brd ff:ff:ff:ff:ff:ff
inet 172.26.0.1/24 brd 172.26.0.255 scope global br-4b0c0b1426fb
valid_lft forever preferred_lft forever
6: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether 02:42:20:35:f2:18 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
7: br-735422ebaa12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether 02:42:69:d6:87:24 brd ff:ff:ff:ff:ff:ff
inet 172.28.0.1/16 brd 172.28.255.255 scope global br-735422ebaa12
valid_lft forever preferred_lft forever
8: br-ea3a9d577a27: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether 02:42:f0:69:98:56 brd ff:ff:ff:ff:ff:ff
inet 172.29.0.1/16 brd 172.29.255.255 scope global br-ea3a9d577a27
valid_lft forever preferred_lft forever
10: vethbabe826@if9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-3ae2f1a8fd4c state UP group default
link/ether 72:5f:1d:7a:50:20 brd ff:ff:ff:ff:ff:ff link-netnsid 2
12: veth9a55f0d@if11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-735422ebaa12 state UP group default
link/ether 92:c7:5f:50:24:d8 brd ff:ff:ff:ff:ff:ff link-netnsid 5
14: veth2b398e6@if13: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-4b0c0b1426fb state UP group default
link/ether e6:77:13:d1:68:a9 brd ff:ff:ff:ff:ff:ff link-netnsid 6
16: vetha7e53d5@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-735422ebaa12 state UP group default
link/ether 8e:35:1c:cc:42:24 brd ff:ff:ff:ff:ff:ff link-netnsid 4
18: vethb592cca@if17: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-4b0c0b1426fb state UP group default
link/ether 4e:b8:f0:02:7f:da brd ff:ff:ff:ff:ff:ff link-netnsid 0
20: veth6e0ca30@if19: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-735422ebaa12 state UP group default
link/ether e6:4e:73:f5:6e:2c brd ff:ff:ff:ff:ff:ff link-netnsid 3
22: vetha3649ed@if21: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-ea3a9d577a27 state UP group default
link/ether 9a:31:c5:64:a8:34 brd ff:ff:ff:ff:ff:ff link-netnsid 2
24: vetheed560d@if23: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-4b0c0b1426fb state UP group default
link/ether 3e:a9:2b:72:f3:1b brd ff:ff:ff:ff:ff:ff link-netnsid 1
26: veth8e00cf4@if25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-ea3a9d577a27 state UP group default
link/ether 66:4c:f2:55:e8:07 brd ff:ff:ff:ff:ff:ff link-netnsid 4
28: vetha32980f@if27: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-735422ebaa12 state UP group default
link/ether 2a:d2:2d:09:c4:cd brd ff:ff:ff:ff:ff:ff link-netnsid 2
30: veth9bd8d73@if29: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP group default
link/ether 36:4f:64:28:55:41 brd ff:ff:ff:ff:ff:ff link-netnsid 7
User avatar
Wiredancer
Jr. Member
Posts: 95
Joined: 28 Aug 2021, 05:01
Location: New Zealand
URL: https://lntxbot.com/@wiredancer
Contact:

Re: updating problem

Post by Wiredancer »

I think its 192.168.1.2 eth0 adapter.
Did you find my post helpful?
Why not send me few sats?
:arrow: Get LN QR code.
Happy routing!
spherionic
Newbie
Posts: 5
Joined: 20 Sep 2022, 21:09

Re: updating problem

Post by spherionic »

that doesn't seem to work.

Here is what shows on my router

# Status IP Address MAC Address Device Name
1 Allowed 192.168.1.2 DC:A6:32:FD:5E:05 myNode
2 Allowed 192.168.1.6 9C:EB:E8:06:F2:4E UX31A
3 Allowed 192.168.1.8 88:DE:A9:18:A1:50 RokuUltra-506
...

here is what happens when I sudo on 192,168.1.2

admin@myNode:~ $ cd mynode
admin@myNode:~/mynode $ git checkout tags/latest_release
HEAD is now at 5893716b Tag v0.3.05
admin@myNode:~/mynode $ mkrootfs
-bash: mkrootfs: command not found
admin@myNode:~/mynode $ make rootfs
Creating root file system for raspi4
Creating root file system for debian
Creating root file system for rockpro64
Creating root file system for rock64
Creating root file system for rockpi4
Done!
admin@myNode:~/mynode $ make start_File_server
make: *** No rule to make target 'start_File_server'. Stop.
admin@myNode:~/mynode $ make start_file_server
Starting HTTP Server on port 8000...
admin@myNode:~/mynode $ sudo mynode-local-upgrade [192.168.1.2]
[sudo] password for admin:
Sorry, try again.
[sudo] password for admin:
Make sure your PC is running 'make start_file_server'...
http://[192.168.1.2]:8000/mynode_rootfs_raspi4.tar.gz: Invalid IPv6 numeric address.
admin@myNode:~/mynode $
User avatar
Wiredancer
Jr. Member
Posts: 95
Joined: 28 Aug 2021, 05:01
Location: New Zealand
URL: https://lntxbot.com/@wiredancer
Contact:

Re: updating problem

Post by Wiredancer »

Did you try to run just

Code: Select all

sudo mynode-local-upgrade 192.168.1.2
Did you find my post helpful?
Why not send me few sats?
:arrow: Get LN QR code.
Happy routing!
spherionic
Newbie
Posts: 5
Joined: 20 Sep 2022, 21:09

Re: updating problem

Post by spherionic »

ok that is better, but i still just get error. it keeps trying over and over without success -

--2022-11-25 14:41:53-- (try: 4) http://192.168.1.2:8000/mynode_rootfs_raspi4.tar.gz
Connecting to 192.168.1.2:8000... connected.
HTTP request sent, awaiting response... No data received.
Retrying.

--2022-11-25 14:41:57-- (try: 5) http://192.168.1.2:8000/mynode_rootfs_raspi4.tar.gz
Connecting to 192.168.1.2:8000... connected.
HTTP request sent, awaiting response... No data received.
Retrying.

...
Post Reply